WORKSHOP EQUIPMENT KITS – Sfmkart.com

U.103A Medium power engineering puller kit

Mon, 12 Dec 2022 11:57:31 +0000

• This complete set offering normal pulling power for
all general engineering applications.
• Comprising:
– U.35L (spread 15 to 75 mm) and U.34 (spread 40 to 180 mm):
wide leg pullers for outside grip pulling.
– U.51B: bearing inside puller (spread: 32 to 70 mm).
– U.40: beam.
– U.33A: 30 tonne jack.
• Supplied in a steel case BT.108 with tray PL.195A.

]]>

U.102T General engineering puller kit

Mon, 12 Dec 2022 11:53:40 +0000

• Comprising:
– U.32T2-8: 2-tonne sliding-leg puller and set of long legs;
reach P1: 105 mm, P2: 185 mm.
– U.32T6-20: 6-tonne sliding-leg puller and set of long legs;
reach P1: 150 mm, P2: 280 mm.
– U.53T2: separator (spread 15 to 110 mm).
– U.33A: 30 tonne jack.
• Supplied in metal case. BT.108 with tray PL.287 (removable tray)
and PL.288 (box bottom tray).

]]>

U.301BJ1 Light engineering puller kit

Mon, 12 Dec 2022 11:50:09 +0000

• Comprising:
– 1 leg puller U.301 for outside grip pulling
(spread 10 to 80 mm).
– 4 clamps U.49P1 to U.49P4 (spread 6.5 to 18 mm).
– 1 beam U.53 KL0.
• Supplied in plastic case BP.112 with tray PL.182B.

]]>

U.JA3 General engineering puller kit

Mon, 12 Dec 2022 11:44:44 +0000

• Comprising:
– 1 sliding leg puller = U.32T6-20 outside grip (spread 20 to 200 mm) /
inside grip (spread 130 to 290 mm).
– 1 separator U.53T2 (spread 15 to 110 mm) and the beam U.53K2.
– 4 clamps U.49P5 to U.49P8 (spread 18 to 50 mm).
– 1 slide hammer U.306M with adaptor tip U.49BR1.
– 1 jack U.33A (capacity 30 tonnes).
• Presented on the PK.1 panel.v

]]>

U.J2 4-Tonne kit

Mon, 12 Dec 2022 11:41:23 +0000

• Comprising:
– 1 clamp puller for outside grip = U.306A140 (spread 7 to 140 mm).
– 2 sets of 3 long legs for outside grip = U.306G10 (spread 10 to 180 mm)
and U.306G15 (spread 20 to 260 mm).
– 2 sets of 3 legs for inside grip = U.306G2 (spread 23 to 130 mm)
and U.306G20 (spread 60 to 170 mm).
– 1 long screw with tip U.306-3.
– 1 beam U.40 (attached using ring and nut U.306A1, supplied with the kit).
– 1 slide hammer U.306M.
• Presented on the PK.1 panel.

]]>

U.JA1 Light engineering puller kit

Mon, 12 Dec 2022 11:37:16 +0000

• Comprising:
– 2 slim leg pullers for outside grip = U.301 and U.302
(spread 10 to 80 mm).
– 4 clamps for inside grip = U.49P1 to U.49P4
(spread 6.5 to 18 mm).
– 1 slide hammer U.49L.
– 1 separator for difficult outside grip = U.53T1
(spread 5 to 60 mm) and its beam U.53K1.
• Presented on the PK.2 panel.

]]>